• View as:
Sort by:
3 4 shaft adapter - 283 items found | Last update: 05 February 2023 - 09:40:05

APDTY 150001x4 Jack Lift Point Pad Adapter Set Of 4 Fits Tesla Model 3 (Protects Battery, Paint, Side Skirts; Use 1 With A Floor Jack Or All 4 For A 4-Point Professional Vehicle Lift)

Brand New Jack Lift Point Adapter Set Of 4Fits Tesla Model 3Protects Battery & PaintSee APDTY-150001 For A Single Adapter For Use With Floor JackThis set of 4 vehicle lift point adapters allow for proper lifting on the Tesla Model 3. The top shaft fits perfeclty into the factory lift point on the model 3 which prevents damage to the side skirts and most importantly the battery. The top surface also has a rubber washer for premium paint protection. The rubber oring is also installed so you can preinstall the lift adapter which allows for an easy placement of either the floor jack or lift.

ARES 70073 | 3-Piece Impact Universal Joint Set | 1/4, 3/8 and 1/2-inch Drive Chrome Moly U Joint Sockets Access Hard to Reach Fasteners

Don't Get Stranded With A Busted Universal Socket The ARES Impact Universal Joint Set features an innovative ball design that distributes torque loads evenly over a greater surface area, enabling an improved action range of motion for easier access to hard to reach areas with significantly enhanced strength and life over traditional sockets. Made from high-strength, premium Chrome Moly steel with a Manganese Phosphate coating to resist corrosion, these universal joints are designed for use with all cordless, electric, and pneumatic impact wrenches and are laser-etched for easy identification. Spring-loaded detent balls securely latch and the through-hole in the drive end locks onto the drive tang, so you can work securely and safely, even in tight spots.  Features:  Includes: 3 pc. impact universal joints One 1/4-inch drive One 3/8-inch drive One 1/2-inch drive Designed for use with all cordless, electric, and pneumatic impact wrenches Constructed of high-strength, premium Chrome Moly steel Manganese Phosphate coating resists corrosion Laser-etched for easy identification Innovative ball design that distributes torque loads evenly over a greater surface area Improved action range of motion Spring-loaded detent balls securely latch and through-hole in the drive end locks on...

Roadmaster (048-6) Hi-Low Hitch

The leading cause of tow system failure is towing out of level. Use the appropriate size drop to level out your towing system. Drop can be turned up or down to either lower or raise the hitch height. This sku changes the hitch height by 6". Heavy duty 10,000 lb. capacity with a 400 lb. tongue weight rating.

MaxxHaul 70355 1-1/4" to 2" (Fits class II only) Hitch Adapter with 4" Rise and 3-3/8" Drop

MaxxHaul 70355: This hitch adapter conveniently converts all 1-1/4" Class II hitch receivers with a 1/2" diameter pin hole into a 2" Class II hitch receiver with a 5/8" diameter pin hole allowing for the option to utilize it for a 4" rise in height or for a 3-3/8" in height drop. The entire unit is constructed in full steel weighing in at a solid 10.4lbs and is coated in a powder coat finish to resist both rust and corrosion. The shank is crafted of solid steel ensuring a sturdy connection into a 1-1/4" hitch. This 2" x 2" hitch adapter is perfect for bike racks, cargo carriers, hitch steps and the like that require a standard 2" hitch receiver for the desired device to attach onto. This product is not designed for towing. It's maximum tongue weight load rating is 350lbs.

Flojet 18555000A 18555-000A Portable RV Waste Pump

Designed to greatly improve one of the least desirable functions of the RV experience. Cleanly handle both the black and gray water from your holding tanks with this new self-priming, powerful macerator pump. The pump housing is designed to connect on to the standard 3" sewer adapter. Power leads with plug may be permanently attached to vehicle, or battery clips may be attached for complete portability. Note: Some vehicles require an angle adapter for proper fit. Use this product in accordance with EPA Sanitary Regulations.

MaxxHaul 70067 8-Position Adjustable Ball Mount - 5000 lbs. GTW Capacity

Our MaxxHaul 8-position adjustable ball mount is ideal for multiple towing applications up to 5000 pounds. Two 5/8 inches diameter hitch pins secure 8 different level towing positions. All MaxxtHaul adjustable ball mounts feature heavy duty welded construction and a weather resistant black powder coat finish, and are manufactured and tested to meet all current SAE safety standards.

Kolpin 3-Way Hitch, 1 1/4-Inch - 85610

Versatile hitch to handle all your towing needs, this multi-hitch does it all. The innovative design enables dual towing capability with the ball mount or pin mount.

MaxxHaul 70032 1-1/4 inches to 2 inches Hitch Adaptor

Our MaxxHaul Hitch Adaptor converts your 1-1/4 inch receiver to accept 2 inch hitch mount accessories. Not to be used for towing a trailer. All MaxxHaul ball mounts are coated with heavy duty black powder finish to resist rust and corrosion and are manufactured and tested to meet all current SAE safety standards.ONLY FOR CLASS II HITCH RECEIVER.

OTC (1023) Mechanical Grip-O-Matic Puller - 2 Ton, 2/3 Jaw (Reversible Jaws)

The OTC 1023 is part of a complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.

Neiko 00239A Flexible Extension Bar Set (2 Piece), 1/4" x 3/8" - 6" x 8", Clear

High quality Chrome Vanadium steel ends with tough flexible spring shafts. For use where a traditional solid extension bar will not fit. Suitable for all hand ratchet applications.