• View as:
Sort by:
Show:
shorelander trailer light kits - 220 items found | Last update: 29 January 2023 - 07:57:13

Wellmax 12V LED Trailer Lights, Submersible and Waterproof Low Profile Rectangular Tail Lights for RV, Marine, Boats, Trailers

Low Profile Submersible trailer light kit included: - Includes two 12V LED tail and turn signal lights and stainless steel hardware. - Engineered using premium corrosion resistant materials. - Optimal LED light clarity,dimensions 8" x 3" x 2¾" Functions and features: - All of our lights are water proof and submersible. - Fully operable in inclement weather and rough terrain. - Ensure wires connect correctly without risk of electric short before submersion in water. 100% DOT compliant: - Lights are federally compliant for optimal visibility, durability and reliability. - Reduces the risk of liability in the event of property damage or personal injury. - Compliant lights prevent you from being ticketed during your travels. Cost effective and flexible light alternative: - Outfitted for trailers measuring up to 80 inches wide. - LED lights last 30-40 times longer than standard incandescent bulbs. - Replace your bulbs less often and maneuver your trailer with confidence.

Jammy LED ShoreLand'r Style Boat Trailer Light Kit for Over 80" Trailers

LED Lighting Kit for Over 80" Wide Boat Trailers. 6-1/4" x 3-3/4" size submersible tail lights have marine grade tinned wire, triple sealed electronics and 8" pre-attached leads for use on regular and marine trailers. Curbside (right) lamp has 18 Diodes. Streetside (left) light has 24 diodes, including license lamp diodes. Fits Karavan, ShoreLand'r, Continental and similar Dry Launch Style lamp applications with 2-Bolt industry standard mounting for easy replacement or upgrade. Included lighting meets all DOT/SAE standards for 7 & 8 function rear lighting. Wishbone wire harness has 25' hot leads to run down both sides of the trailer and one 30" ground wire with ring terminal for frame grounding.

CZC AUTO 12V LED Low Profile Submersible Rectangular Trailer Light Kit Tail Stop Turn Running Lights for Boat Trailer Truck Marine

CZC AUTO 12V LED Low Profile Submersible Rectangular Trailer Light Kit includes 2 combination Submersible running/stop/tail/turn signal lights,license plate bracket and Mounting Hardware, 25ft length of 4 pin wire Harness for enough use. waterproof IP67,UPDATE ON 9TH,JANE,2019.FOR BETTER SERVICE ON OUR CUSTOMER,WE IMPROVED THE WIREHARNESS TO 18GAUGE 100% COPPER WIRE FOR WATERPROOF USELeft light have 22 diodes which include 4 diodes for lincense plate light function,Right light have 18 diodesStainless steel hardware for under and over80" marine towing vechileEach rectangular light size:8" Length* 3" width* 2-3/4" heightSuper bright LED quality ,Complies with DOT standards Have assembly and opearating Instructions for easy installingConnect the BROWN wire of the Trunk Harness(4)to the towing vehicle's Running Lights wire Connect the YELLOW wire of the Trunk Harness to the vehicle's Left Stop & Turn light Connect the GREEN wire to the towing vehicle's Right Stop & Turn light Attach the WHITE GROUND wire to the towing vehicle's frameFrequently bought together:Warning Tape B071DT18PC http://a.co/d9ZjUo4Clearance ID Bar B07235MJ61 http://a.co/i0NtHTaAlu license plate bracket B076BSF4ZJ http://a.co/fnus4zEMore ChoiceUnder 80" Trailer Light Kit B06ZZRKYHD http://a.co/2NRI97eOver 80"...

Optronics TLL56RK Red Rectangular LED Combination Tail Light Kit

This is a Optronics Red Rectangular LED Combination Tail Light Kit which includes One Passenger Side and One Driver Side Lights and a 25 ft. harness and a Black License Plate Bracket, Stainless steel mounting hardware. These light are designed for marine application and is a sealed waterproof construction with a universal mount. It is hard wired, with separate ground wire with stainless steel hardware.

Wellmax 12V LED Trailer Light and Wiring Kit, Attachable Tail Lights for RV, Marine, Boat, Trailer, Camper, Low Profile Submersible and Waterproof

Low Profile Submersible trailer light kit included: - Includes two 12V LED tail and turn signal lights, wires, wiring harness, license plate bracket and stainless steel hardware. - Engineered using premium corrosion resistant materials. - Optimal LED light clarity,dimensions 8" x 3" x 2¾" Functions and features: - All of our lights are water proof and submersible. - Fully operable in inclement weather and rough terrain. - Ensure wires connect correctly without risk of electric short before submersion in water. 100% DOT compliant: - Lights are federally compliant for optimal visibility, durability and reliability. - Reduces the risk of liability in the event of property damage or personal injury. - Compliant lights prevent you from being ticketed during your travels. Cost effective and flexible light alternative: - Outfitted for trailers measuring up to 80 inches wide. - LED lights last 30-40 times longer than standard incandescent bulbs. - Replace your bulbs less often and maneuver your trailer with confidence.

Blazer C7280 LED Low Profile Submersible Trailer Light Kit

The Blazer C7280 LED low-profile submersible trailer light kit is designed to conform to applicable US FMVSS108 and Canadian CMVSS safety standards for trailers over and under 80" wide. The driver’s side features a combination of 8-function stop, tail, turn, rear and side reflex, rear clearance and side marker and license illumination functions. The passenger side has the same functions as the driver’s side with the exception of the license plate light. This kit is not only ideal for boat trailers, but for any utility, camping, snowmobile and motorcycle trailer where LED lights are desired. The life of an LED trailer light far exceeds traditional incandescent trailer lights. Lenses are sonically sealed to provide protection from moisture and corrosion. Additionally, all electronics are potted with water resistant epoxy for a second layer of defense. These stop/tail/turn lights are individually replaceable with model numbers C7288TM and C7298TM. The kit includes (2) submersible stop/tail/turn lights, wire harness, license plate bracket, mounting hardware, and trilingual instructions, everything needed for easy installation and DOT compliance.

CE Smith Trailer Bunk Board Guide-On, 2'- Replacement Parts and Accessories for Your Ski Boat, Fishing Boat or Sailboat Trailer

CE Smith Trailer, 27660, 2' Bunk Board Guide-On. Carpeted bunk boards provide proper center loading even in wind or side current conditions. For larger trailer frames check out our Large Frame U-Bolt Kit (11416). Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The edges of the pre-galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating less than 1 mm and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so its recommended that they be primed and painted.

Wesbar 407515 Submersible Tail Light Kit with Side Marker/Clearance Lights, Over 80-Inch

The kit comes complete with two taillights, two amber clearance/side marker lights with reflex lens, 20' trailer wiring harness cable with molded four prong plug, 4' four wire car wiring harness cable with molded 4-way plug plus license plate bracket. Unique, compact size and shape allows these lights to fit where space is limited. The lens is sonically-sealed to the base providing a "bell jar," making this lamp fully submersible with easily replaceable bulbs. These lights meet FMVSS/CMVSS 108 requirements for trailers over 80" wide when properly mounted. Limited 1 Year Warranty.

Jammy Boat Trailer LED Light Kit for Over 80" Wide Marine Trailers

LED Lighting Kit for Over 80" Wide Boat Trailers. 6-1/4" x 3-3/4" size submersible tail lights have marine grade tinned wire, triple sealed electronics and 8" pre-attached leads for use on regular and marine trailers. Curbside (right) lamp has 13 Diodes. Streetside (left) light has 17 diodes, including license lamp diodes. Fits Karavan, ShoreLand'r, Continental, Magic Tilt and similar Dry Launch Style lamp applications with 2-Bolt industry standard mounting for easy replacement or upgrade. Included lighting meets all DOT/SAE standards for 7 & 8 function rear lighting. Wishbone wire harness has 25' hot leads to run down both sides of the trailer and one 30" ground wire with ring terminal for frame grounding.

Dry Launch 327RBX-9964- Submersible Marine Waterproof Light Bar

I.D. Light Bar for Boat Trailers is a submersible, air trapping and all Lexan light bar. Its bulbs snap-out easily. Self cleaning contacts. This light bar is a one piece lens - Can't fall off or be knocked off. One or two wire hook-up. Can be bent to trailer "V".

Etsy
AliExpress
HomeDepot
OverStock
Costco